C&I Solar & Storage System
A cabinet-based storage system for factories, warehouses and commercial rooftops, combining peak shaving, demand control and PV self-consumption.
- Capacity
- 100 kWh – 1 MWh
- Cooling
- Liquid cooled
- Fire protection
- Pack-level detection
Certificates and test reports are shared for the specific model and destination market.
Key Features
Demand charge control
Discharge follows a configured demand ceiling to avoid monthly peak penalties.
Liquid-cooled racks
Cell temperature spread is held within a narrow band, which keeps capacity stable in hot climates.
Parallel expansion
Additional cabinets can be paralleled later without replacing the EMS controller.
Technical Specifications
Values are typical for the standard configuration. Confirm the order datasheet for guaranteed figures.
| Parameter | Value |
|---|---|
| System voltage | 600–1000 V DC |
| Round-trip efficiency | ≥ 90% |
| Cycle life | ≥ 6000 cycles @ 90% DoD |
| Enclosure | IP54 / C4 anti-corrosion |
| Operating range | -20 to 55 °C |
System Topology
A typical arrangement for this product line. The final single-line diagram is issued for each project.
Schematic of the low-voltage interconnection: utility, PV, storage and standby generator on one busbar. For illustration only — project drawings follow the site protection study.
Application Scenarios
Factory with high daytime demand
Storage shifts PV generation into the production peak instead of exporting it.
Cold-chain warehouse
Backup capacity protects refrigeration loads during grid interruptions.
Product Photos
Frequently Asked Questions
Yes. Send twelve months of bills and a load curve if available; we return a sizing sheet with expected shifting volume.
C&I Solar & Storage System
Datasheet, certificates and a sizing sheet for your site.
